SPEC A
Complete Teardown
Cylinder Head Deburred
Complete Visual Inspection
Check All Surfaces for Straightness
Inspect Valve Train for Wear
Springs Checked
Degreased & Cleaned
Blueprinted Competition Multi-Angle Valve Job
Starting at $450.00 USD (Labor Only)

SPEC B
Head Refresh Plus...
Casting Flash Removal (Polished & Deburred)
Hand-Lapped & Vacuum-Tested Valve Seats
Bowl Port & Polish (behind valve seat)
1 Inch Gasket Match Port & Polish (Intake & Exhaust)
Blueprinted Valve Springs (Shims Extra if needed)
Complete Assembly
CC Combustion Cambers
Starting at $1250.00 USD (Labor Only)

SPEC C
Street Phase Plus...
Competition Port & Polish
Deshrouded & Polished Combustion Chambers
Competition Back-Cut Valves
Radiused Blend Seats
Hand-lapped & Vacuum-Tested Valve Seats
Starting at $1500.00 USD (Labor Only)

SPEC R
RALLY Phase II plus...
Enlarged Port Configuration
Enlarged Valve Seat ISD
Cylinder Head Deburred & Blueprinted
Detailed Matched Intake Manifold Fully Ported to Head
Matched Throttle Body
Chamber Volume Balanced
Multiangle & Radiused Vavle Job
Port Faces Lapped Flat (Studs removed and reinstalled)
Deck Milled & Lapped (Up to .030 with no additional charge)
Starting at $1900.00 USD (Labor Only)

SPEC EXTRAS
Combustion Chambers deshrouded, polished and CC Balanced $300.00 USD
Enlarged Combustion Chambers Upgrade for oversized bore $200.00 USD
Injector housing plate removal and ported $300.00 USD
Injector housing ported $200.00 USD
Exhaust Manifold Port Match $150.00 USD