PURE Tuning - Subaru EJ Competition Short Block Assemblies Spec R

Subaru EJ Competition Short Blocks

SPEC A

SPEC B

SPEC C

SPEC R

Cylinder Heads

Long Block Assemblies

SPEC R
The Subaru Spec-R Short Block engine build is designed to optimize the performance of the factory engine while maintaining exceptional reliability. Utilzing lighter and stronger forged aftermarket parts the engine receives the same attention that a race prepared engine would. While this is a basic package any amount of other upgrades can be added for an additional charge, including but not limited to Pro lightened cranks, Pro Piston Polish Service as well as a wide variety or coatings and treatments to further improve longevity and HP. Add a PURE Tuning Cylinder head stage and have a full long block built. The Spec-R short block comes with a complete build sheet, break-in-procedure, recomened oil and serial number.

SPECS
2.0L-2.7L 8.2-10.5:1 CR Max Gasoline/E85 (EJ205,EJ207,EJ255,EJ257)

INCLUDED SERVICES
- Block Disassembly
- Block Cleaning and Inspection
- Block High Temp Paint
- Block Deburr
- Block Oil Passage Porting
- Cleaning of all parts
- Inspection of all parts
- Sleeve Installation
- Torque plate machining
- Diamond Bore
- Cylinder Hone
- Plateau Hone
- Cylinder Block Deck
- Crank Line Hone
- REM Polish Crank
- Pro Balanced Rod / Piston Assembly (to .1g)
- Pro Balanced Rotating Assembly
- Blueprint
- Final Assembly

INCLUDED PARTS
- 2618 Billet LW oversize pistons
- Ceramic Coated Piston Tops
- Anti-Friction Coated Piston Skirts
- Offset Wrist Pin
- Performance Rings
- Darton Sleeves
- Forged 4340 I Beam Rods
- ARP 625+ Rod Bolts
- 4340 LW Billet Crank
- Direct Dual Oiling
- 75mm, 79mm or 83mm stroke
- Coated ACL Race Main Bearings
- Coated ACL Race Rod Bearings
- ARP Main Case Bolts
- Subaru Required Seals & O-Rings

Pricing
Short Block	$8470.00 USD*
Short Block Core (New or Used)	Available Upon Request

Optional Parts / Services
REM Polished Rods	Add $280.00 USD
WPC Cylinder Walls / Pistons / Piston Rings / Wrist Pins	Add $1120.00 USD
Oil Pump Pick Up	Add $189.00 USD
Oil Pump Pick Up & Baffle Upgrade	Add $259.00 USD


*Price starts at published Price as parts cost vary depending on engine. Customer provided engine core. Any additional parts, services or machining extra. Price does not include Shipping and Insurance.